VQ Powered Grocery Getter
Join Date: Mar 2008
Location: Downingtown, PA
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Thanked 1 Time in 1 Post
iTrader: 0 reviews
Don't do it.
Do it the right way. Remember the line is under 51psi of pressure!!!!!
Fuel Pressure release procedure.
1. Pull the fuel pump fuse in the fuse box near the washer fluid. (IDPM E/R)
It should be a 15 amp fuse on the bottom front row. Second set of fuses on the lower row.(4 large fuses/ capacitors, then 2 rows, bottom row front fuse for a 3.5)
You will need to pull the fuse rail up to get to it probably. Look for tabs to release it I think
2. start engine
3. After engine stalls crank it 2-3 times to release all fuel pressure
4. turn off ignition
5. Remember to reinstall fuse when you hook it up. (cause Nissan tech's need to be told) lol
Good luck. Let me know if you need a picture.
CAT-back & exhaust
Radiator cap & Oil cap
SSIM Intake, NWP Spacers & VIAS Plate
Racingline Y-Pipe, Endlinks, Tower Strut and Battery BAR, Traction Bars
STS, S5 Grill, Fusion 12" Sub, Train Horns , 350 HP 385 Tq Dynotune NO2
Last edited by SE-R Altima Driver; 09-08-2010 at 03:22 AM.