Any way to have fog lights on without headlight being on ?

[KillahKev]

So I'm trying to wire my fog lights to be on without headlights or parking lights on and I still want fog lights to work with the oem headlight/ fog switch. Is that any why possible ? can I run a wire from postive termial on battery to fog light fuse or realy ? or can I tap into my power wire on my fogs and run it to my battery power side ? any help or can I bridge two pin on the realy etc etc anyone tired this or did this ? thanks...

[KillahKev]

Check multiple sites and nothing on Altima's ):

[slvrbackgorilla]

I think there is a write up on here somewhere. I'm pretty sure it's for the 04-06 altimas though. Don't know if it'll be the same concept.

[KillahKev]

Originally Posted by slvrbackgorilla

I think there is a write up on here somewhere. I'm pretty sure it's for the 04-06 altimas though. Don't know if it'll be the same concept.

I only found it for the 90's qx4 or something like that. I'm pretty sure Nissan change the wiring. Lol

[blueis300]

Yeah not sure if its the same but did it on my Sentra. Sure its gotta be similar.

[slvrbackgorilla]

I'm pretty sure they did one for 3rd gen altimas. If I'm not mistaken it was spoke that did the write up.

[KillahKev]

Originally Posted by blueis300

Yeah not sure if its the same but did it on my Sentra. Sure its gotta be similar.

You know how you did it ?

Originally Posted by slvrbackgorilla

I'm pretty sure they did one for 3rd gen altimas. If I'm not mistaken it was spoke that did the write up.

And yea I still been searching can't find no good threads ...

[VQP0WER]

No. Older Alti's yes, but not this one. Best option would be to bypass the stalk and wire the fogs directly to a switch. Everything is controlled via the modules so it's not like a simple splice a wire in a relay box type of task.

[KillahKev]

Originally Posted by VQP0WER

No. Older Alti's yes, but not this one. Best option would be to bypass the stalk and wire the fogs directly to a switch. Everything is controlled via the modules so it's not like a simple splice a wire in a relay box type of task.

is there a way I can still have to oem stalk work it foglight/headlights and then have another switch just for foglights? trying to keep car oem as possible no funny wireing or etc lol

[KillahKev]

bump ttt .

[VQP0WER]

Originally Posted by KillahKev

is there a way I can still have to oem stalk work it foglight/headlights and then have another switch just for foglights? trying to keep car oem as possible no funny wireing or etc lol

Not that I have ever seen. I remember doing this mod to my old 2001 Maxima, and it was easy. Our cars though are a different animal. Everything is controlled through the modules.

[KillahKev]

Originally Posted by VQP0WER

Not that I have ever seen. I remember doing this mod to my old 2001 Maxima, and it was easy. Our cars though are a different animal. Everything is controlled through the modules.

But my question is can I run another switch somewhere to control the fogs to be on w/o the headlight and if I wanted still use the oem switch ?

[MuranoDriver]

http://www.nissanclub.com/forums/200...eadlights.html

A Nissan dealer should be able to change your BCM to allow it.

[saywat?]

^where in that thread u posted does it refer to the dealer making the change?

[saywat?]

OP u can buy a foglight harness relay kit on ebay and hard wire your fogs to it but ull lose functionality on the stalk . or try kP technologies fog light module