Where to find replacement side mirrors.

aaronmac90 · #1 (**permalink**) 02-26-2013, 02:47 PM

I am looking for a set of led integrated side morris to put on my car. So far my only option is the dealer($345 each

). Does anybody know where to find a pair that won't cost a fortune and a half?

**4DZC** · #2 (**permalink**) 02-26-2013, 02:54 PM

This car is still too new to find aftermarket items such as this. Dealer is the only present option.

tharam04 · #3 (**permalink**) 02-26-2013, 04:51 PM

Yea the car is too new for this. However I was searching for LEDs to add to my car and found someone had added a LED strip to the mirror. Just run the strip around the inside of the housing (see image) and tap into the existing wiring.

aaronmac90 · #4 (**permalink**) 02-26-2013, 06:33 PM

Not an option. I want the OEM style mirrors that the sv has.

mrpacman · #5 (**permalink**) 02-26-2013, 10:49 PM

Hit up a junkyard or ebay for a wrecked one? Imagine you could get it for cheap from a salvage group.

shan · #6 (**permalink**) 02-28-2013, 08:41 PM

is your car prewired for blinkers to work?

tharam04 · #7 (**permalink**) 03-01-2013, 04:50 PM

Quote:

Originally Posted by shan

is your car prewired for blinkers to work?

Correct me if I'm wrong, but I thought that all of them are by default. Just have pull the carpet back and to tap into the wiring that runs under the door.

shan · #8 (**permalink**) 03-01-2013, 05:02 PM

It wasn't the case with the 4th gen altima. Not all cars were pre-wired. I think it was said car that had heated mirrors, it was plug and play for them. And car that didn't had heated mirrors had to run wires.

On my 4th gen since i had the heated mirrors it was plug and play. But since my 2013 doesn't have heated mirrors not sure if blinkers would work. Didn't had to time either to check if it's pre-wired or not.

Do a search on the 4th gen forum and read up on it.

aaronmac90 · #9 (**permalink**) 03-08-2013, 12:54 PM

Whether its plug and play or not your car still has a turn signal in the front and in the back that could be tapped. As far as the heat grid goes, I have a bunch of empty spaces on the left side of my steering column where a switch was supposed to go. Anything is possible if you know how to run the wires.