|
Well I decided that I will just modify the stock one. Not because of the length of time by Kinetix but it did allow me time to consider the cost and benefit and I think I can accomplish almost as much with the old one. I finished it yesterday took about 4 hours to cut the shelf completely out for direct flow to all 6 runners and eliminate the butterfly valve. It will reduce low end but for the track at WOT you are only at a low RPM for a brief time in 1st gear after that its all over 4000 RPM. I also have a 3400 stall converter so even less time at lower RPM's.
|
