Quote:
|
Originally Posted by virgilio7
please share some info
|
Ok here is pic, its hard to show the whole inside, but basically I just removed the whole shelf area between the upper and lower area. You have to be careful that you don't cut right through the wall. I used a small body saw to do it but the individual that told me about it used a dremel type tool with an aluminum cutting bit. I cut as close as I could all the way around to remove the maximum amount of material and open up the area between all 6 runners.
Second pic is the butterfly valve cover I made out of tinted lexan.
I am also going to make a phenolic spacer where the lower IM connects to reduce heat. I already bought the material but its going to take some work to cut it out.
