Mod Listing for B15 Sentras (Primarily Spec V's)

[spkell]

Apexi n1 or WS? I'm considering the WS, so I'm curious.

[paraNoidmidget]

LOL @ being jdm......the car isnt even a japanese car = /

\

\
\but to the other comment about the apexi id go N1 if you plan on going forced induction because the world sport isnt meant for turbo or anything so WS if your staying na or stock...... and N1 if you plan on turbo or supercharging = )

[orangeSE-R]

i have an 06 se-r and i already got a injen cai but i was wondering which header and exhaust can give me the most horse power

[ipunish1216]

well the megan header is great and it is a great price i got mine for 175 off ebay and its bomb ass. however the megan catback sucks !!! after like 15k it got really load. all the fiberglass in the muff burned out so dont get that one!!

[***CCCP***]

does eny1 know where i can buy LED rear lights for nissan sentra SER spec-v 2003

[LoNgIsLaNd)^]

I have to agree with the exhaust comment. I just did my Stillen header with the down pipe (no cats) OMG it sounds like a Civic @ its worst. My next step is def gonna be the cat-back exhaust prob go with Stillen setup since ive already got that going on.
I have a quick question about cca now I just got K & N Typhoon system, is there a big difference in power from K&N to AEM??? I'm having second thoughts about what I got.
Thanx

[Spooled04V]

I have a 2004 Spec-V it is on its second motor, transmission and Clutch... The transmission and Clutch were warranty and the Motor was me boost happy at the track...
I Built the entire turbo kit my self... I did not feel comfortable spending $4000 on a kit when i made mine for just under $2000. I painted my wheels black, and has full nissmo suspension from the factory. I made a full 3" mandrel bent exh. I own a SAFC - II but i have yet to find a ECU pin out inorder to install mine. I am running a TIAL 38mm Waste Gate with the smallest spring ever produced by TIAL (5.5 LBs.). The car is amazing... i love it.. I currently have the bottom half of the engine apart. i filled my motor mounts and i removed my balance shafts.

IF you have any questions about the car leave me a message or e-mail me, Ptavernier177@gmail.com! I will get some pictures up as soon as i can.


Is there anyone on this forum who does have a turboed Spec V other than me? I had a few questions if any one does...

[hslspecv]

I was wondering where you can buy the casper electronics 02 simulator...my SES light just came on

[Sentradriver]

I have a 01 Sentra SE - all the mod companies say their parts only fit SER's and SER SPEV V's ... WTF ???

[sentra23]

Where can i get some body kits and grills for my 05 spec v?

[ayuds1]

great post thanks, i have some questions... Would the GReddy Ti-C catback OBX headers and high flow cat be a good street legal combo? I have it narrowed down between the EVO2 and the Ti-c exhaust, everone seems to use the evo. Are there any downfalls to the Ti-c?

[dank_greens]

is the arm cai supposed to have that foam thing?

[Narium26]

I have a 2006 Spec-V and I want to know which suspension is the best for my car. I just really want the springs for now and looking for the most drop possible. Any help would be appreciated.

[Amili]

You think my 1.8SE would be worth upgrading w/ these extras? cuz i know it aint a GXE i guess what im sayin is i dont know much thats y im here to learn :P so an honest opinion would be very much appreciated.


Thanks

[0305spec-v]

Originally Posted by Narium26

I have a 2006 Spec-V and I want to know which suspension is the best for my car. I just really want the springs for now and looking for the most drop possible. Any help would be appreciated.

I'm runnin eibach springs with ebay monroe struts, and i like it.. Ride could be better, but like I said, ebay monroe struts.
Older picture... This is with springs, before struts. Sits a little lower now. Plus, I have LED tail lights on it now!