Quote:
Originally Posted by Studio472
- Power Kenwood KAC-8103D MONO block Amp w/ remote control KCA-WR10 Bass Knob - Having Frequency & volume control (at the amp level) will make up for a lack of head unit...for now.
- Sub - Single JL 12 W3v2 in a sealed box
- Will tap rear deck speakers for HI level input, the amp has a HI/LO converter (yes I know it won't sound as good as RCA's at line level - this is the price I pay for NOT upgrading the HU) Eventually will go with a nav unit...
- Do not plan on replacing any of the factory speakers, (other than the muddy rears, I really like the mids / hights)
- Plan on adding bass blockers to the rears (after the Hi/Low)
Questions...
- Where should I connect the trigger wire for the amp? Does anyone know the color codes for the wires on the HU?
- Is there any "Low" level I can tap directly out of the factory HU?
I'm open to your suggestions and ideas...
I DO own the sub. Do not own the amp yet...
|
The controls on the amp will not make up for the lack of a headunit, you won't even b able to mask it if you have a discerning ear.
The non bose system does not have low level anywhere in the system. It is solely amplified by the head unit no external amplifier therefore tapping the rear speakers is ideal because of the ease of removal. I would suggest removing the rears, and leaving them out, if you don't you will find a lack of bass coming into the cabin. I know the wiring has changed for 2007 so I'm not sure what the remote wire looks like back there anymore... previously it was a purple wire on the oem harness.