ka24de-t project has begun

[Altima_2000]

nice setup Phill....i bought a ss atuchrome manifold and it looks decent... ill hit u up phill on the waterneck tomorrow bro

[2000TurboAlty]

SOOOOOLLLLDDD!!!!!pming now

[itwillrun]

Thanks man.

[rtkskater44]

i cnt wait too buy a canopy tent.... my (mild) build will take place... turbo/ build project wont be till later.. however i am going too start building my spare block before 2012... atleast have it all taken apart..phil if i were you i would invest in a canopy tent (enclosed /portable garage like tent ) and possibly a kerosene heater... this would make for a perfect shelter too work on your car during the winter and have no worry of messing with snow and weathering etc.... hit me up, if you want one ill let you know how much i can get one for.. 20% off at pepboys

[itwillrun]

I had one it ripped into pieces lol, waste of money. Either get a garage or a cover and wait the winter out.

[Altima_2000]

Lucky for me I just bought a town home with a big garage :-) phill ill be bugging all winter long wit the project

[zadeluca]

Originally Posted by Altima_2000

thats great man...but what exactly you have left? because i seen that your parts sold quick.

sorry for the delayed response, everything listed in the first post is still for sale, i have been deleting them as they sell.

turbo parts still available are JWT fuel rail, greddy type rs bov, cobra maf, jgs GT oil line kit, t3 log manifold, 3" bluebird downpipe (damaged but still usable), autometer boost and oil pressure gauges. also have act s/s clutch kit and b&m short shifter that may be of interest

[Altima_2000]

thanks for posting back. can you post pics of the gauges..if i would of known u still had the manifold i would of bought it instead of the ss autochrome..

[Altima_2000]

Shot at 2011-11-14

my setup as it stands right now... i will test fit it tonite and see how it goes.

[Altima_2000]

Shot at 2011-11-14


Shot at 2011-11-14

here's another shots

[2000TurboAlty]

DUUUUUUUUUUUUUUUUUDE i will buy the shitttttt outta that manifold i jus pmd you....drunky never got back to me! pls hook it up BRO! i've been tryin to buy a diff manny for a minute now! Please post some details if ya can..namebrand...etc PLEEEASE AND THAAANK YOUUUUUUUUU!

[2000TurboAlty]

Cool set up man! are u going to go with an internal wastegate or eventually switch? best of luck with the ss auto! if no one gets back to me about a mani i'd love to hear your feedback on the performance i kno phil says they should be pretty good!

[BiGJoHn619]

with that manifold you wont need the custom water neck its not gonna touch nor will it cause any problems with the upper coolant hose.

[Altima_2000]

thanks guys ill post back on here to let yall kno about fitment and performance. i personally would of bought zadeluca's but it dont fit my t28. 2000TURBOALTY- yea bro im going to be running 7psi so im good with internal wastegate, how is your setup doing? im stuck in the engine management part, jwt or greddy emanage blue?

[2000TurboAlty]

Originally Posted by Altima_2000

thanks guys ill post back on here to let yall kno about fitment and performance. i personally would of bought zadeluca's but it dont fit my t28. 2000TURBOALTY- yea bro im going to be running 7psi so im good with internal wastegate, how is your setup doing? im stuck in the engine management part, jwt or greddy emanage blue?

As soon as i find an adequate manifold i'm going to go e85. I was going to do other stuff first but im not very patient lol. IMO if you plan on rebuilding this car and making at or above 350whp/tq i would go with an aem standalone..they're expensive as ****...but worthwhile...what i have is IMO the next best thing i have the aem f/ic...it should work for my goals and as this article explains is a tad better than the greddy emanage...http://www.dezod.com/files/FICvsEMAN.pdf hope this helps...the f/ic is perrty close to a standalone(i call it one lol) but not quite and about a g$$$ less. ps Your set up looooks siiiiick bra!