NEW Extreme Flow Kinetix SSV Manifold

[Velicos]

I'm going to send weekly emails asking them the status of the intake manifold -- everyone else should do the same.

kinetix@hotmail.com

[hacku]

They use a Hotmail account?

Why doesn't that surprise me?

[Control Altima Delete]

^^ LOL ya, they are waiting for a part from their Service Provider, should be ready next week.

[AltiAzul]

Originally Posted by manibal

Thanks for the update, Doug.

Are you planning a new dyno between the fitting and the polishing? Cause we need to see what the production version will do over the 1st one.

Cheers.

Mark,

I have headers now. It would not be a fair comparison. But I do have anew dyno with the headers on.

Doug

Originally Posted by virgilio7

yeah, U have the emanage now. so i guess u can do one dyno after the test fitting? problably 3 passes and then the tunning on the polished version. or you are going to wait for the polished version to do dyno and tunning?

I was hoping to only have to dyno once more. If all goes well, then I will have an after dyno and an after-after dyno (tuned) from the tuning.

[bolt.com]

Holy crap....38,000 jackasses have checked in on this thread since it started. Gotta figure at least 30,000 are repeat asshats like me checking on the status of this bogus endeavor.
Like I said earlier. If they come out tomorrow for $10.00 a unit, I wouldnt buy the thing on principle. I cant stand jerkoff procrastinators!!!

[manibal]

Originally Posted by AltiAzul

Mark,

I have headers now. It would not be a fair comparison. But I do have anew dyno with the headers on.

Doug



I was hoping to only have to dyno once more. If all goes well, then I will have an after dyno and an after-after dyno (tuned) from the tuning.

Hi Doug;

Can you share with us the dyno now with the headers before the SSV?

[shyestsparks]

Originally Posted by manibal

Hey Doug or Geoff:

Have either of you guys set an install time yet with Robert for the production SSV?

It has been real quiet hear at the front.

Cheers

Sorry about the delay in response; still waiting.

[AltiAzul]

Originally Posted by manibal

Hi Doug;

Can you share with us the dyno now with the headers before the SSV?

The numbers are 224.9 Hp and 226.6 ft-lbs of Tq. I was thinking of starting a new thread with the graphs. Look out for "HS Headers with the EGR fitting dyno results" in the next couple of minutes.

HS Headers with the EGR fitting dyno results

[manibal]

Originally Posted by AltiAzul

The numbers are 224.9 Hp and 226.6 ft-lbs of Tq. I was thinking of starting a new thread with the graphs. Look out for "HS Headers with the EGR fitting dyno results" in the next couple of minutes.

HS Headers with the EGR fitting dyno results

Great, numbas.
So you are confirmed with Kinetics for next Thursday FOR SURE????

cheers

[manibal]

Originally Posted by shyestsparks

Sorry about the delay in response; still waiting.

Your next after Doug, but that needs confirming with Kinetics. Let me know when you have heard from them.

Cheers.

[anthunny]

Originally Posted by hacku

They use a Hotmail account?

Why doesn't that surprise me?

yeah. cuz its soo professional....... lol

[FXSTC-99]

Originally Posted by Speqz954

$175 for what? the header install? where did you go for that? and were you at tacobell the other night in weston?

$175.00 for header install.... ditto... like Fab... If someone is willing to only charge me around that much for an install, who am I to stop them...

It took them a couple of hours and they did a decent install, I do have a cell light, but I know is related to the rear sensors (the ones in the cat) so, it doesn't concern me much...

Hey, I was riding my bike the other day going from 595 to 75 south (on the ramp) and saw this black Alti - black rims.... wonder if that was you?... my bike has ape hangers...

[virgilio7]

most likely was spec

[Speqz954]

yes it was most likely me, i take that ramp 6 times daily

[net.altima]

are we there yet?