NEW Extreme Flow Kinetix SSV Manifold

[virgilio7]

which ones you choose?

[Jime]

Got them from Deluboz.

[virgilio7]

of course. nice choice.

[dkocur]

Thanks Jime. Nice pics and explanation.

[pepe 3.5]

nice .............i will love to se the results and the feel of the car with out the butterfly and the porting...........

[manibal]

Originally Posted by Jime

The Power valve opens for top end and joins the upper and lower areas effectively reducing the runner length. What I have done is remove the power valve plus the remaining metal that joins the upper and lower. The metal I removed is probably 3 times the area of the power valve butterfly and completly opens that area completely so there is no division at all.

This pic sort of shows how the length of the runners is lengthened and shortened by the power valve operation.

Very well done, Jime!

This is one of the best self mods with pics and diagrams I've seen in a long while.

Thanks for being the pioneer!

[Jime]

Well got my cams a couple of hours ago so I am installing them now and hope to finish this weekend. Because I have to put the engine in outside I am waiting until the following weekend to install the engine and trans its supposed to go above freezing for a couple of days. Gotta love the great white north.

Will keep you guys posted on how the intake manifold works out if your interested.

Here is another pic of the intake from another angle which may help. The black circle is approximately where the butterfly of the power valve was located.

PS Although I'd love to take credit, the mod was described to me over the telephone by Tilleys99 of maxima.org who is the pioneer of the 3.5 swap. He did his a couple of weeks ago.

[hacku]

Got any pics of the entire manifold that are not close-ups?

[net.altima]

if you break up the even flow wont it make the engine run rough since the power of each cylinder might be affected?

[virgilio7]

what kind of gains he got from this? any info?

[milktdry.com]

Originally Posted by virgilio7

what kind of gains he got from this? any info?

that's the QUESTION...
results??

[Bigox911]

Originally Posted by Jime

Because I have to put the engine in outside I am waiting until the following weekend to install the engine and trans its supposed to go above freezing for a couple of days.

there really is something wrong with this statement...

[virgilio7]

????

[Control Altima Delete]

Originally Posted by Bigox911

there really is something wrong with this statement...

When you live in Canada there is nothing wrong with that statement.

[Speqz954]

Originally Posted by AltiAzul

From Kinetix:

things are going OK, but not great

The first run will be about 15 units, followed by another 15, etc.

We will most likely do an initial group buy that will have some
savings, havent figured out the price yet though.Expect it to be similar to the 350z , with a group buy discount off that price.

Hopefully we will launch group buy in 2 weeks, with first batch shipping 2 weeks after that

almost 3 weeks ago...so can we expect a group buy anytime soon?