Jim Wolf response to counterfit Ebay Cams - Page 15

hacku · #**211** (**permalink**) 11-03-2005, 01:38 PM

Good luck witht the dyno time today bro... keep us posted.

Da Mayor · #**212** (**permalink**) 11-03-2005, 02:58 PM

i hope there's some gains especially in low end torque thats my big issue

virgilio7 · #**213** (**permalink**) 11-03-2005, 03:04 PM

low end torque doesn't feel changed at all. you might feel better torque but the power is up top right at the fuel cut. I was cruising my car on first gear at about 3000 rpm and the tires started spinning at wot from 5000 all the way thru 6500 then the limiter kicked in and shifted. it feels better but the dyno will tell.

shyestsparks · #**214** (**permalink**) 11-03-2005, 06:08 PM

Results?

walec05 · #**215** (**permalink**) 11-03-2005, 07:20 PM

anything yet. im hope you got what people thaught you get. it feels good, but without a dyno you cant really tell. dont keep us waiting. common.

NmexMAX · #**216** (**permalink**) 11-03-2005, 07:44 PM

Quote:

Originally Posted by Da Mayor

i hope there's some gains especially in low end torque thats my big issue

Sorry to say but cams are known to give you the EXACT opposite.

altimateone · #**217** (**permalink**) 11-03-2005, 08:07 PM

it shouldn't be to anyone's surprise that these cam give increase hp in the upper RPM. This isn't what we were suppose to find out here.
The whole purpose of installing these cams was to see if they were good cams. Did they fvck your engine up? are they flawed morph cams as JWT says they are.

NmexMAX · #**218** (**permalink**) 11-03-2005, 08:09 PM

Quote:

it shouldn't be to anyone's surprise that these cam give increase hp in the upper RPM

That was my point.

hrbib21 · #**219** (**permalink**) 11-03-2005, 10:09 PM

Quote:

Originally Posted by NmexMAX

Sorry to say but cams are known to give you the EXACT opposite.

That would depend on the cut.

NmexMAX · #**220** (**permalink**) 11-03-2005, 10:26 PM

Quote:

Originally Posted by hrbib21

That would depend on the cut.

JWT/NISMO/Tomei (VQ35 manufactures. )are all geared toward high end power ... T'was my point once again ...

virgilio7 · #**221** (**permalink**) 11-04-2005, 12:30 AM

wow. good news. how does 265 top the wheels sound? I gained from 15 to 20 whp. the torque stayed the same at 242-243. some runs at 245. but for sure what a change. awesome product and highly recommended. will post the dyno graph tomorrow.

Ballz3 · #**222** (**permalink**) 11-04-2005, 12:32 AM

now that is awesome! lucky man!

Jime · #**223** (**permalink**) 11-04-2005, 12:32 AM

Excellent good stuff. Was hoping for good results. Thanks for the headsup.

xtremeaudio44 · #**224** (**permalink**) 11-04-2005, 12:36 AM

Wow, I only expected maybe 5-10whp. How many pulls did you do? Were those numbers consistent? Very Nice Indeed!!

shyestsparks · #**225** (**permalink**) 11-04-2005, 12:40 AM