How about 270whp+ N/A?

[Iceman00]

On a VQ30

Dyno - cammed DEK!! ruh roh - Maxima Forums

[TUKO316]

not bad considering its a 3.0. his mods are fairly simple which makes this such a good accomplishment.

[Iceman00]

Originally Posted by TUKO316

not bad considering its a 3.0. his mods are fairly simple which makes this such a good accomplishment.

It also make it simple to duplicate, especially on a 3.5...

Do you guys have Variable manifolds too?

[Blacktop_Prefect]

^yep.

[Iceman00]

Awesome, then with a Good set of cams, and A REV-up oil pump, I'd LOVE to see what a VQ35DE would do.

I should pick up a VQ powered car...

[Blacktop_Prefect]

I dunno man, people have cammed their fwd VQ's before with good results but they didn't get near 300 whp iirc. Maybe they didn't tune it well enough or something, though.

[TUKO316]

one member here, Manibal, has 270 whp with stock rev limiter. His dyno was done a day also. with a few more mods and a higher rev limitier he should hit 300whp or come damn well near it.

his dyno shows the power climbing up all the way to redline. with a rev limit set to 7500rpm he could have hit 280whp. with a SSIM and a true dual exhaust he prolly get 300whp.

Dont forget he had the greddy emanage aswell so if he switched to a UTEC he could squeeze more power out of his current setup. another member (Bigjeff) here has a automatic SE-R with intake headers and tru dual exhaust and dyno'd at 269whp. which makes me beleive with all bolt ons and a good tune, a 6speed or 5speed can hit 300whp.

[Iceman00]

You guys have those Dynos you speak of?

And leave it to the maxima guys to show VQ tuners how its really done. The 350Z community should take note.

[Natewood70]

You can also search around, an older member, who no longer has his Altima Jay.Are, had a true dual exhaust, headers, intake, cams, and a UTEC tune, and hit 270 whp

[3.5altman]

Torque is too low for me. Seems like thats what makes these vq torque. Maybe its just me. just my 2 cents