More Dyno = Cattman Headers

[LuiggieSE-R]

Ok, Last night I went to dyno to play with the car...
Baseline = 233 whp/236 torque
After adjust AF a little bit
Tune = 246.7 whp/245.9 torque

I started to play with timing and advance 1 degree but for some reason the car started to knock after 5k rpms so I decided no to play this area.
Dyno run files are available if you want to see, those number are SAE with smoothing = 0 and conditions:
~85F, ~30 in-Hg, ~42% humidity

After I upload video I will added here.

[theshocker3.5]

very nice man, where did you pick up the greddy EU and wiring harness? this looks like a very worthwhile mod....

[LuiggieSE-R]

You can find the harness adapter on any Greddy dealer,
part # is 15921505 - adapter

for emanage Ult. you can go to ebay

BTW - offtopic
I read someplace that Greddy is in backrupcy but I dont know if it is true.

[theshocker3.5]

Yeah I think I heard that about Greddy as well. How is this comparable to lets say a SAFCII?

[m_turner_02]

safcII<greddy eu<utec

[LuiggieSE-R]

I don't have experience with SAFCII but with the EU:

• Is plug and play application
• You can Datalog
• 4 dip switch that you can load different settings and use in real time
• have different input options that you can use for external tools, for example I have Innovate LC1 wideband installed and I can plug to my EU
• alter the cut off limiter
• etc etc

[theshocker3.5]

hmmm interesting.....so the greddy eu is basically universal and you just need to buy the 350z wiring harness? sounds promising!

[m_turner_02]

reading through the instruction manual you can also alter what rpm it shifts at under, for example 90% throttle. as well as, I believe change how fast it shifts? you can also set up to hold the rpms constant before you launch similar to the honda two-step......

[TUKO]

utec>*

[theshocker3.5]

what's so good about utec

[LuiggieSE-R]

Video, not the best quality but it is ok.

http://www.youtube.com/watch?v=89D2053phMQ

[colombiano_altima]

nice gains and nice vid. car sounds awsome!

i need to go to the dyno to see how much im putting down after spacers, headers and technosquare, just something about dropping $90 to see how much power my car is putting down that is not so appealing to me..i think thats whats been holding me back..

[Juiced SE-R]

UTEC is the $hit period!!! I'm getting rid of my SAFCII to get a Utec.. There are lots of advantages when running a Utec...

[theshocker3.5]

plug and play? what is required to hook it up besides the device itself?

[altima09]

Where do you buy this?greddy emanagement???