06 2.5 Mods

hmoney · #1 (**permalink**) 09-12-2009, 07:45 PM

After the basics of CAI, Exhaust, and headers what other mods can be done to a 06 2.5 QR25?

CMDrew6115 · #2 (**permalink**) 09-13-2009, 11:30 AM

There is an endless list of mods for your Altima, try searching and you'll find more than you ever wanted to know about your ride.

3rdgen2.5s · #3 (**permalink**) 09-13-2009, 07:31 PM

Searching does help but not if you don't know exactly what to search for so here are a few things you should look up and decide if they are the right modifications for you. Jim Wolf technology camshafts and balance shaft removal kit(look up what the balance shafts do in the first place), Lightweight crankshaft pulley, Short throw shifter kit if you are a manual, racingline motor mount inserts and their soon to come race pipe, send your intake manifold off to FFP for porting and polishing Form and Function Performance
Start there and search and then ask legitimate questions to save yourself the trouble of being flamed.

CMDrew6115 · #4 (**permalink**) 09-13-2009, 09:55 PM

I was reffering specifically to this thread which would have come up in any search for the 2.5:

http://www.nissanclub.com/forums/eng...on-thread.html

And I'm pretty sure no matter how new you are, this thread would help significantly.

3rdgen2.5s · #5 (**permalink**) 09-13-2009, 11:06 PM

Helpful.....a little bit it is pretty outdated and isn't very accurate IMO. That's why I offered specific topics to search.