Nissan Enthusiast Forums

}{yBr1D · #1 (**permalink**) 01-22-2005, 09:57 PM

Custom Enterprise

DEPO

Stock

kjk11 · #2 (**permalink**) 01-22-2005, 10:44 PM

the depo one is the one you made?...if it is can u tell me how u did it?..thanks

}{yBr1D · #3 (**permalink**) 01-22-2005, 10:47 PM

I didn't make them lol, DEPO did lol..

kjk11 · #4 (**permalink**) 01-22-2005, 10:52 PM

but if you take the headligth apart and sand down the lines..will be da same? or close..wat dou think it'll look like?

}{yBr1D · #5 (**permalink**) 01-22-2005, 10:54 PM

Not like the one's I have in now... the lines on the lens surve as a purpose as the clear one's have that "diamond" cut look... those lines were put on the chrome part which makes the lens clear.. you do not need 2 set's of light patterns... then you'd obscure the light range... if you sand down the stock lamps they'd look like this...

(see the difference?)

kjk11 · #6 (**permalink**) 01-22-2005, 10:58 PM

but then it won't reflect as nice rite..wat will be teh down side to it? if i jus sand it down?

}{yBr1D · #7 (**permalink**) 01-22-2005, 11:00 PM

If you take off the light patterns from a stock lamp you will not project the light properly and you'll blind on-coming traffic... the light patterns project the light properly so it can have an even flow of light so you can see forward and not blind other people. This is why when people sand down their lamps they retrofit projectors for D2S HID bulbs so they wont blind people...

kjk11 · #8 (**permalink**) 01-22-2005, 11:07 PM

lol..intersting maybe a headlight project will fix all this...w/e i'll c cuz those depo headligths look sick..how much did u get them for?

}{yBr1D · #9 (**permalink**) 01-22-2005, 11:11 PM

I got them in a GB (Group Buy) for $160 shipped I believe their at 170 now, I'm not sure...

Here's the thread where I found out about them...
http://www.nissanclub.com/forums/sho...d.php?t=175027

}{yBr1D · #10 (**permalink**) 01-23-2005, 02:55 PM

Missed one!!!!!!!! lol FAQ this one too lol..