My first time makin a diy, so correct me if im wrong, if u have questions feel free to ask..
Materials
-spoiler
-wire-any gauge wiring
-smirnoff
-drill
-drill bit
-music
MOST IMPORTANTLY HAVE THE RIGHT DRILL BIT TO CUT THRU METAL
gET SOMETHING WITH A POINTY EDGE SO U CAN MAKE A BUMP SO THAT WHEN YOUR DRILLING IT DOESNT GO ALL OVER TH EPLACE AND STAYS IN ONE SPOT
BEFOREEEEEE
dURINGGG
use a sharpie
had to cut a bit more cudnt get the socket in the hole( thas what she saidd) wiring-connect it to the brake light or if u have a third brake light
splice open both wires and join duhhhh
green/yellow-POWER WIRE(use)
BLack-Groungd wire(use)
Black/red wire- parking lights (do not use)
be sure when u gett the spoler get the harness also (none of the models come with it)..i cut mines off the donor car
aFTERR IL ALLL DONE
__________________ <<<she can detail my whipp
Last edited by singhz4lyfe : 11-06-2009 at 07:29 PM.
Now get rid of the 3rd brake light. It looks terrible with the LED in the spoiler. Or t least just disconnect it for now.
__________________
Done: H&R/tok's, I/H/E w/ cat delete, FSTB, ST sway bar, Racingline RS MMI and Endlinks, JWT ECU, 15'' 240sx wheels
Quote:
Originally Posted by allblackedout111
People will tell stories of the legendary white vq powered altima that races down the touge late at night when no one's around. All you can hear is the vq heel toe sound rolling through the mountains, but it's a ghost, no one has ever really seen it, only stories exist. But it's out there, oh it's out there.
What did you use to make the marks to know where to drill? You know how you placed the spoiler on the trunk, how did you know where the hole was to bolt it down basically.
What did you use to make the marks to know where to drill? You know how you placed the spoiler on the trunk, how did you know where the hole was to bolt it down basically.
got a sharpie....got some tape and started taping until it filled the hole and made a mark by inserting it straightso that it hit the middle of the hole
+1 on the lock washers. It looks good but idk where your from man but smirnoff? Where I am from its strictly jd or beer when working on a car lol good job.
__________________
Injen short ram
Obx headers and catback
custom high flow cat
SW auto u pulley
15 alloy wheels
spoiler
lowered w/ toks and a arm brace
vader carbon fiber hood
Soon to install
vortech bypass racing valve
sparco intercooler
garret t3/t4
+1 on the lock washers. It looks good but idk where your from man but smirnoff? Where I am from its strictly jd or beer when working on a car lol good job.
+1 on the lock washers. It looks good but idk where your from man but smirnoff? Where I am from its strictly jd or beer when working on a car lol good job.
hah didnt feel like makin the drive, so i had w/e was chillin in trunk..grey goose or smirnoff, i wanted to do it sober..loll plus it tastes good as ****
Did you silicone around the edges of the spoiler to make sure water won't leak underneath and get into you trunk and/or rust out our trunk lid?
GOOD call lol.... i actually have sum very thin weather stripping under the wing to prevent as much viberation as possible lol.. wen i get a couple hours, im going to deffinetly silicone around it.. i have about a mm or soo gap
My first time makin a diy, so correct me if im wrong, if u have questions feel free to ask..
Materials
-spoiler
-wire-any gauge wiring
-smirnoff
-drill
-drill bit
-music
MOST IMPORTANTLY HAVE THE RIGHT DRILL BIT TO CUT THRU METAL
gET SOMETHING WITH A POINTY EDGE SO U CAN MAKE A BUMP SO THAT WHEN YOUR DRILLING IT DOESNT GO ALL OVER TH EPLACE AND STAYS IN ONE SPOT
BEFOREEEEEE
dURINGGG
use a sharpie
had to cut a bit more cudnt get the socket in the hole( thas what she saidd) wiring-connect it to the brake light or if u have a third brake light
splice open both wires and join duhhhh
green/yellow-POWER WIRE(use)
BLack-Groungd wire(use)
Black/red wire- parking lights (do not use)
be sure when u gett the spoler get the harness also (none of the models come with it)..i cut mines off the donor car
aFTERR IL ALLL DONE
How do u mark those holes? mark it and drew from the bottom or ? also do u just cut off those wire and put it together?
__________________
Now:NGK spark plug &wires set ,Aftermarket intake
Coming up soon: NOt sure
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
<<<she can detail my whipp
Linear Mode
