H&R Springs Installation on 3rd 2.5s

[khaltima02]

I just wanna make sure that my installation is correct. I installed the springs in with the letters on the front springs upside down, but not on the rear springs. Is that correct?

[saywat?]

i would think the letters should not be upside down..

[khaltima02]

Have you done it with H&R Springs because If you look at the springs, you will see that it can't up right side up because if you do it that way it won't fit the mount.
It is still very strange how H&R make these?

[phreekee25]

According to H&R website: "When the spring is fitted the stamp markings on spring should be readable, i.e. not upside down."
H&R Spezialfedern GmbH + Co. KG

[khaltima02]

I can understand that, but if I turn it rightside up, it won't fit to the struts? If you have install the springs before you can see the top is smaller than the bottom.

[biggie5663]

[khaltima02]

I'll try using my phone to get some pictures?