Tein S Tech.

[tl2k2max]

Originally Posted by starwaiting

is it S.tech cheaper than H.tech?
i'm looking for a set of H.tech with KYB GR2

the h-tech is a very mild drop, u might as well go with s-tech. gap is still going to be considerable with the h-techs.

[Mb23bca]

If you dont go s.techs/sportlines theres really no point to lower your car...

drop still looks semi stock.

[hattrick3518]

^^ slam it or go home right mike??

i think i just messed up something in my pass front suspension, i dunno if its strut or not, its a noise that increases as speed increases, almost as though something is rubbing.

you ever experience something similar mike?

[Mb23bca]

^^ EXACTLY!!! lol...

Idk i have herd blown coils before and they are like a squeeking noise i herd nothing wrong with driving them like that besides the noise..

I havent but ppl i know have but not from springs and struts...


but i would guess it would have to be that.

[bighohn]

For the kyb gr-2. was wondering if you need any hardware other then stock to install them?

[starwaiting]

Originally Posted by tl2k2max

the h-tech is a very mild drop, u might as well go with s-tech. gap is still going to be considerable with the h-techs.

As i just want to reduce body rolling and i don't wanna bottom out whole time..so, just can go with either prokit or h.tech
one more question guys, kyb-gr2 + lowing spring can reduce my SE-R's body rolling? very uncomfortable right now

[hattrick3518]

OP:

did you ever install them?

been a month and no pics

[Asleep]

didnt go with the s-techs - got the racingbeat instead. but i have a speed6 so you guys probably dont care. lol

[hattrick3518]

asleep...

nice, how low is it?

i do like the looks of the mspeed6's

any pics of it, you can pm if you want to

[tl2k2max]

Originally Posted by Asleep

didnt go with the s-techs - got the racingbeat instead. but i have a speed6 so you guys probably dont care. lol

yes we dont care about mazdas!!! nah, but for real, racingbeat is a good brand for mazdas.

Originally Posted by starwaiting

As i just want to reduce body rolling and i don't wanna bottom out whole time..so, just can go with either prokit or h.tech
one more question guys, kyb-gr2 + lowing spring can reduce my SE-R's body rolling? very uncomfortable right now

im on s-techs with stockers (no kyb) and hardly any bodyroll. but with a lesser drop, i cant be certain there wont be bodyroll when u turn.. u might want to ask those with pro kits, as i dont recall many people on h-techs.

[Asleep]

Originally Posted by hattrick3518

asleep...

nice, how low is it?

i do like the looks of the mspeed6's

any pics of it, you can pm if you want to

havent thrown them on yet because ive been in arizona for the past 2 weeks. but we are back now and theyll probably go on this weekend. ill post pics of it lowered then. for now, you can see it at my cardomain. www.cardomain.com/id/hotlicia

[bSER272]

Originally Posted by tl2k2max

the h-tech is a very mild drop, u might as well go with s-tech. gap is still going to be considerable with the h-techs.

Originally Posted by Mb23bca

If you dont go s.techs/sportlines theres really no point to lower your car...

drop still looks semi stock.

I don't agree. I have H-Tech's and i think the drop, especially the rear, is more than enough. here's an old pic of mine with H-Techs...

[tl2k2max]

^^^ u know what, that doesnt look as bad as i thought. i pictured it sitting alot higher in front.

[saywat?]

^^in my experience if ur putting h techs on a 2.5 the front will sit higher cus of the weight difference since tien makes the springs to fit both cars

[bSER272]

i think the weight difference between the VQ and QR is only 40 lbs IIRC. may be enough to make a difference i guess.