http://www.sosvinyl-ligthing.com
I've been getting a lot of PMs lately about doing retrofits for members. Since I'm not a vendor, i can't really post up in the for sale section, so I'm just going to give all a basic breakdown.
NC members get a discount on labor for a basic retrofit. The price of the parts are all available on the TRS website. I will have you paypal me the money, and i can order everything on my account and have it shipped to me directly so you don't have to worry about paying shipping on those items.
DISCLAIMER: For all 07-12 all these lights use Permaseal from the factory. Due to this, resealing them is not always 100% perfect. If the lights are highly weather beaten, the permaseal may not be able to have all of it removed. If that is the case, when the lights are resealed, there is a risk of moisture getting in. Because Nissan used Permaseal, they do not use screws to hold the lens to the housing like the 3rd gens do, which leaves a risk of not having a perfect seal. I try to remove all of it if I can, but some lights are just in bad shape, and it's not possible to get it all out. Most of the lights I get are core exchanges, or from cars that were wrecked, so sometimes there maybe broken tabs or mild scratches. If a tab is broken, it's not a big deal as long as at least 3 of the tabs are good or can be reattached.
Now for the goods. a basic retrofit includes the parts below. which all should be purchased from TRS
Bi-xenon: Morimoto Mini H1 4.1 - HID Projectors from The Retrofit Source Inc . I will never suggest anyone else, because their products are top notch, and the customer service when there are problems are absolutely perfect.
H1 Minis $120 or Mini D2S $110 (this is perfect if your car came with stock xenons, no need for a HID kit or bulbs if you want to keep using your stock bulbs)
Gatling gun shrouds $45-50
sealant $35
and a set of headlights.
and a basic paint job on the interior pieces (if you request it)
and aiming the cutoff
Also if you already have a HID kit, you only need to get new H1 bulbs with the Mini H1, not a full new kit. The Mini D2S uses a D2S bulb
My Labor is $300 for the basic, so $505 total + shipping charges if you are not local to me. There will be an extra $200 core charge if I have to ship out the lights once completed that will be refunded to you as soon as I get your core lights sent back to me.
If you want Halos, LEDs, or anything fully custom, PM me and I can give you an individual quote.
If you do have a non altima car, let me know if you want a quote. As a NC member, i still give you the same deal
If you have any questions, feel free to post up, or PM me
bluestreak
Sexy G
Linear Mode
