I can't get the fluid to come out of the master cylinder for the clutch even with the line connected and I took the master cylinder off. Took it apart, cleaned it put it back together, put it on there. Everything looked the work properly and fluid won't come out. Please help
Anyone have any advice on swapping the clutch?
I purchased an exedy stage 1 kit.
Here's my plan
-Unbolt battery tray
-Remove air box
-drain gearbox oil
-Disconnect steering knuckle from shocks
-support engine with jack
-disconnect shift linkage
-disconnect temp sensor and...
Just finish adjusting my clutch pedal and it has made a big different in the engagement point. If you clutch is catching too high in the pedal travel you might want to try and do this adjustment. Did a little video showing what I did below.
I am currently messing around with my skyline. Mine has the OS Giken racing clutch kit and ever since it’s been super sensitive and goes all the way back to the firewall. Is this something I could adjust through the clutch adjuster bolt or did I mess up somewhere. Cause it shifts...
Hello guys.So my AC was always working superb. One day it just stopped working completely. My car is 2014 Nissan Altima S 2.5L.
I measured pressure with ac harbor freight ac manifold gauge and AC Low side is closing extremely high closing the meter gauge at over 350 psi (low side) and Hi side...