The Nissan Club banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
    So I have a 2005 Altima, all new suspension in the front. My big axel nut comes loose all the time even when torqued to spec, come to find out this is causing my hub to go bad. I’ve replaced this same hub about 4 times two of which was a loaded knuckle (forget trying to press the hub bearing)...
  2. Nissan Tires, Wheels, Brakes & Suspension
    I'd like to invite everyone to share facts on what must be done when lowering your suspension whether it's using springs, coilovers, or air suspension. For example, Since you will need an alignment done. What other parts are needed? Do I need to change out shocks, control arms, steering...
  3. B16 2007-2012 Nissan Sentra Discussion (SE-R / Spe
    So I'm having a hard time tracking down this part, 54465-ET80A, for some repair work. The car has taken some hits on the underside and a replacement is in order but this has been labeled discontinued. Is 544C4-EN000 from the automatic transmission compatible with the manual installation or not...
  4. Nissan Murano Forum
    Good Day Hope all is well and safe on your side, I drive a Nissan Murano and I added a towbar from Bosal, roughly some 50+KGS and I feel the back of the vehicle heavier and lost some clearance from the tyres to the fenders, I have another set of coils springs that are stiffer than the...
  5. Nissan Tires, Wheels, Brakes & Suspension
    Looking to lower my 2000 altima gxe cant find any lowering springs or coil overs for it. Is there any other cars that use the same setup like a Sentra or maxima that could cross over?
1-5 of 5 Results