The Nissan Club banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi All
MY Son's 2006 Altima 2.5 S with 6 Spd Standard Trans, 195,000+ Miles
Severe Vibration/ Shake on Start Up/ Idle, My Mechanic said it is Not a Cylinder Misfire.
Clutch In or Out (Neutral) does Not make a Difference when sitting still.
Driving it thru Town and at Highway Speeds is Fine, Just coming Back down to Idle makes it Shake.
Thanks, Timmy from CT
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #2 ·
Hi All
MY Son's 2006 Altima 2.5 S with 6 Spd Standard Trans, 195,000+ Miles
Severe Vibration/ Shake on Start Up/ Idle, My Mechanic said it is Not a Cylinder Misfire.
Clutch In or Out (Neutral) does Not make a Difference when sitting still.
Driving it thru Town and at Highway Speeds is Fine, Just coming Back down to Idle makes it Shake.
Thanks, Timmy from CT
So, I wanted to Post Up my Dilemma, I got a Call from my Mechanic, He said the Pressure Plate/ Flywheel DMF (Dual Mass Flywheel) was an Aftermarket (China) and Failed. Springs are All Mashed.
It would Get Offset on Startup and Maybe Find It’s Center at Highway Speed 🤔 ?
I took a Picture of the Center of the Assy and You can See the Offset.
Timmy
 
1 - 4 of 4 Posts
Top