The Nissan Club banner

2010 ROGUE CRANKS BUT WONT START

1103 Views 3 Replies 4 Participants Last post by  NTCTek
I recently bought a 2020 Rogue that had been sitting a while. The battery was completely dead, wouldn't take a charge. Jump start didn't work either. I installed a new battery and it still would not start, so scanned for codes. I got a bunch of codes including one for incorrect crank sensor signal. I replaced the sensor, and it still wouldn't start. I let it sit for a couple of days with the battery un-hooked. Then on the next try it started up the very first time and ran perfectly and smoothly. I thought it was fixed and turned it off. The the next day it wouldn't start again. No CELs on, but a scan showed a stored code "lost communication with the transmission module". My OBD2 scanner will not clear that code. Any help would be greatly appreciated
1 - 1 of 4 Posts
You sure it's not a flood car? When it doesn't start, is the red key security light on solid? And you say it 'doesnt start' does that mean no-crank or crank but no start?
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top