The Nissan Club banner

1 - 7 of 7 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter · #1 ·
I'll do the brake upgrade next two weeks, I'll swap the 300zx brake caliper on the front and Rear disc brake conversion.
Part list:
Front:
2 front caliper from 90 300zx TT (cast aluminium) get it from junkyard
2 custom 300zx rotor from SMC Performance
2 custom brakelines from SMC
2 brake tube from dealer
Aexxis Brake pads

Rear:
2 rear Knuckles with rear caliper and e-brake cables
2 stillen rear disc
2 brake line from SMC
 

·
Registered
Joined
·
475 Posts
uhhhhhhhhhhh no.. do you have a 240sx or something. All the nissan RWD platforms share common front brake mounting points, the FWD platform is completely different in mounting locations. and the rear brakes, i'm not even going to ask.....
 

·
Banned
Joined
·
563 Posts
umm not to mention that altys are 4 lugs and Zs are 5 lug...i doubt that the altima can upgrade to those ...
 

·
Registered
Joined
·
54 Posts
Discussion Starter · #5 ·
I'm sure it fit, I check that before, because my 240sx had upgraded to 300zx, before I put it on 240sx, I try to fit on altima, it fit directly except the rotor, so need to custom (I'm not talking about the lug, I'm talking about the radius of the rotor, or get a shop to make a braket to fit mount the caliper, then don't have to mill the rotor.
Call SMC Performance, 1(949) 369-5223 steve
He knows how to do!
 
1 - 7 of 7 Posts
Top