The Nissan Club banner

1 - 6 of 6 Posts

·
Small Units lives in Ohio
Joined
·
716 Posts
Discussion Starter #1
I'm tryin got put a 99 factory head unit into a first gen. The pins will not fit into the late model cd player-. Will the 99 head unit fit into a 94?

Thanks

Adam
 

·
Registered
Joined
·
23 Posts
if the plugs don't match, you can cut the plug out of the gen2 to put in the gen1. if you're putting in an aftermarket hu, you wont miss the factory plug anyhow.
 

·
Registered
Joined
·
6 Posts
If you don't know what each wire goes to, buy the "replacement" wire harness for a 99 which will plug right into the back of your 99 CD player and have the wire outputs labeled. Then buy a Universal harness adaptor for the 94 which will plug into the car's plug and have wires labeled for hooking up to any CD player.

Just connect each proper speaker wire to each other and do the same with the power wires. You can do this out of the car first to create your own adaptor. Then when you're done you can still put a 94 radio back in and keep your 99 Cd deck or whatever...
 
1 - 6 of 6 Posts
Top