The Nissan Club banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Supposedly, this company has the intake pipe for the Alti'. I just want to know if anyone has got anything from this company. Let me know on the out come of the difference between just using the filter with the 240sx adapter and using the pipe from placeracing. It seem's i've seen this pipe on some Alti's here in the gallery. But no news about the hp you be getting. What i'd like to know is if someone out there can get two Alti's on some dyno's with these two type's of intakes.
One with just the filter on the adapter, the other one with the pipe from placeracing.
Please keep me posted on the outcome of the result's. That's if anyone can do this?( I have in mind someone from Stillen.):D
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #5 ·
good lookin' out

I was talkin' about the cai vs wai. Thing is i'd like to compare both products on dyno charts that way it'll show the big picture.
Now when you be talkin' about the high end, with the sound and all. In my case i get no sound from the front, but i get the sound from the rear of my exhust. The reason being, is i be sporting a Banzai exhaust system. So the air flow from my exhaust is free flowing. I beleive there's less of back pressure on a 4 inch round muffler whereas a oval shaped exhaust. Besides i tried a oval exhuast, it made my exhuast sound muffled. In which is all good. However the con about this system you get a rattling sound from the very tip. I'm not sure if others exprencied this on their Alti' But i have, and i can say there's some Alti's runnin' here in OC with an oval system and they too get that rattling tip sound from the rear.
Now with the intake, i'd like to know if anyone has tried to drop a down pipe from behind the engine bay towards the fire wall. From lookin' at my 1st gen there's a gap of about 8-10 inchs of space below the master brake cylinder. If i had a scanner here at work i'd post the pic of what i'm talkin' about.
Also, where in the world is that pipe from pr going down through?
I can't really see any pic of the location.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top