[tones74]

I checked my clutch fluid resevoir and I couldn't see any fluid in there at all. I know I need to bleed the system when I fill. I read in the Haynes manual that the pedal could no or very little pressure. I still have pressure on the pedal, but what else could happen? Can something else be getting jacked because the fluid is so low?

 

[RyanD]

it never hurts to drop by the ol' mechanic and see what he thinks. Otherwise, put some fluid in, and then re-check it often and see if the level is dropping rapidly or not. If so, slide under the car and check to see for leaks on anything on the tranny side

 

[joehotrod]

prolly the clutch slave cylinder or clutch master cylinder leaking

 

[ThurzNite]

fill and bleed. I found that mine was empty the hard way...driving and the clutch just wouldn't engages...clutch burnt like crazy for the next 3 miles home.
I read some posts and they say to replace the clutch and slave cylinders. I'm gonna look into it if I keep losing fluid.
Did u find both bleeders? I found the one on top of the tranny towards the front of the car. Where's the 2nd one?
Jay