The Nissan Club banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited)
Hey guys!

I'm currently working on a 98' Nissan Skyline GT with an AEM 10-951 plug and play series 1 ECU. Theres a shortage causing the battery to drain only when the ECU was plugged in >0.5 A, without plugged in it was 65 mA. [After testing every individual wire that was connected to the ECU and after looking at the pinout I saw that the spare injector #10 have a 12.0V running while spare injectors #7-9 had a 0V output.]edited (disregard I was reading the manual incorrectly and the other use is for the O2 sensor thanks to d0ugmac1)
Fairly new to cars so any and all advice is helpful. Pinout is attached.
 

Attachments

·
09 Altima 3.5SE 6MT Sedan
Joined
·
6,365 Posts
So, is it not the O2 heater supply as indicated for pin 115 in the guide??

100388
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top