The Nissan Club banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Mine broke so I need it installed. Well I screwd on the nut but now ther throttle settings are screwed. Full throttle is wide open, isle is 1mm, then when i brake, it closes.

Then when i let go of the brake the idle is less than 1mm. So in other words, the idle is only 1 mm after i release the throttle from full throttle. Please help. I brought it to a hobby shop and the kid can't fix it. Now, i'm waiting for the store owner, the "master tech" to fix it next week.:angry4:
 

·
Racin The Days Away
Joined
·
162 Posts
Idle is 1mm but you need to set your idle screw on the side of the carb to hold it out the 1mm. I set mine by disconnecting my throttle linkage and the set the screw and the hooked it up and it works great.
 
1 - 3 of 3 Posts
Top