The Nissan Club banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
having a low beam problem on my 05 Altima. I'm not getting any power to the drivers side low beam. I've replaced all fuses, and headlight assemblies. Its not the Relay, or both wouldn't work, so that leaves me the wiring and possibly one of the modules? Any help would be fantastic. I'm riding around with my hi beams on now, and its embarrassing...lol
 

·
2010 2.5 SL
Joined
·
588 Posts
Welcome to the forums.

A quick solution would be to run a jumper between the hot side of both lights.

That would work assuming;
1) Wire size is enough upstream to handle that load
2) The housing and/or bulb are not the real issue
3) the bulb is properly grounded

Have you performed continuity tests to see if wires are, in fact, connected from the relay to the bulb and from the bulb to ground?
 

·
09 Altima 3.5SE 6MT Sedan
Joined
·
6,365 Posts
Most likely an issue in the ground path. Check the grounding ring and connection held on by the spring clip.
 
1 - 3 of 3 Posts
Top