The Nissan Club banner
1 - 1 of 1 Posts

·
Formerly LordofSearchMod
Joined
·
14,715 Posts
heat it with a heat gun...

warm the frame edge of the of the mirror to 70C (159F) for 3 minutes.

insert a stiff blade scrapper between the mirror and the frame. pry the glass loose and remove the remaining adhesive (butyl tape).

to replace, put 2 vertical strips of the adhesive on the frame. warm area again with heat gun (or lamp) position mirror and press firmly...

direct from a 99 NSM....
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top