The Nissan Club banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
2006 Murano SL runs great when programmed but each time the ignition switch is turned off it will not start again and has to be reprogrammed
KSIGH
 

·
09 Altima 3.5SE 6MT Sedan
Joined
·
6,710 Posts
what are you programming each time?
 

·
Registered
Joined
·
5 Posts
Discussion Starter #4
The mechanic is programming the ECM and the intelligent key fobs everything will work car will start fobs will open and lock doors but if ignition switch is turned off the memory is erased fobs will not work and car will not start
 

·
09 Altima 3.5SE 6MT Sedan
Joined
·
6,710 Posts
Ok, so the fobs are stored in the BCM/NATS. So if it's losing that when the ignition is switched off, you need to determine if the battery feed is still working at the BCM...if yes, replace BCM, if no replace fuse/fusible link.
 
1 - 5 of 5 Posts
Top