The Nissan Club banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,617 Posts
CGann said:
Anyone have experience with something like this?
The dealer gave me touch-up paint. It came in a container with an applicator on each end of a metal tube. One end is for applying the paint and the other end is for applying the clear coat.

The chipped area has to be clean of dirt and wax. I suggest a practice run on a piece of metal so as not to apply too much as it looks like a small rise on the hood. I have actually repaired an area almost as large as a dime. I maskened off the area cleaned it and applied the paint. I lightly sanded with 500 grit and applied the clear coat and wet sanded with 1000 grit and then used Turtle Wax rubbing compound(white stuff). It is almost as good as new.
 
1 - 6 of 6 Posts
Top