The Nissan Club banner
1 - 8 of 8 Posts

·
zerolimit
Joined
·
186 Posts
Discussion Starter · #1 ·
Heyou guys almost done putting her back together I have 4 sensors here not sure where they all go I'm sure 2 r the cam on not sure about the other 2 or if I bought extras don't remember.
 

·
09 Altima 3.5SE 6MT Sedan
Joined
·
6,365 Posts
Yep, those look like the cam and crank position sensors...2+1 on a VQ.
 

·
09 Altima 3.5SE 6MT Sedan
Joined
·
6,365 Posts
Check for part numbers stamped on the sensors and then cross references them, for Nissan part numbers use Tasca or Courtesy's sites, for aftermarket stuff:

cam pos sensors

crank pos sensors

and the crank sensor goes in a small hole to the back side of the engine near the tranny bell housing (IIRC)
 

·
Premium Member
Joined
·
5,855 Posts
Agreed with Doug. The one with the bend in it is the one for the crank position sensor.
 
1 - 8 of 8 Posts
Top