The Nissan Club banner
1 - 20 of 28 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter · #1 ·
Does anyone know where I can get the SR20DET Front wheel drive engine trans and computer that is manual for about $1200.
any info that you have will help.
The pulsar GTI-R would be better if I am not mistaken because it has 235HP instead of 210 and I also heard that the RPM range is higher but not to sure about that one. But I will take either one if anyone know where I can get one.
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #4 ·
GOKU
How much can you get the whole thing for do you know.
Let me know.
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #6 ·
OK thanks I will keep that in mind when I get the engine.
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #8 ·
Donnie
How much are we talking?
Give me a price that I should be looking for.
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #11 ·
OK check it out, I am looking for price so I don't pay to much.
I was pretty sure that I saw a post on here that they said they could get this setup for 1,250. I did a search could not find the post so I figured I would ask and see if that person would speak up. I have someone right now that I can get the engine trans ecu and axels from for a decent price but just want to make sure there isn't a better one out there. As far as many have tried. Many have talked. I am going to do it if I can get what I need. But I am trying to do as much planning so that all goes well. I know that it is not easy but that's ok I will be glad when the swap is complete.
 

·
founding father
Joined
·
1,709 Posts
to do it properly and thouroghly you are looking at an easy $7000-8000
if you are already trying to find a lesser price on just the engine stuff you got a long way to go and you'll need alot more money than you have

btw didn't i already tell you the same thing on IA?
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #14 ·
Sorry donnie you got the wrong person.
This is the first time that I am asking about the swap.
I dont see why it will cost that much.
If you do it your self and I can ge the eng trans ecu axels the only thing that should really have to be maid is the engine mounts.
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #16 ·
I got quite a few people to help me through the whole thing.
don't think it will be a problem but you never know until you try.

But am i wrong about the parts needed to do the swap.
Like i said this is the first time thinking of doing this swap.
 

·
founding father
Joined
·
1,709 Posts
here's the thing...you have just thought about doing the swap...there are MANY people on here including myself that have been researching it for years now. you have no clue on what you're getting yourself in. i hope for your sake that
1- you have another car to drive for a few months.
2- you have a very large bank account.
3- you know how to fabricate things.
4-you have a very large bank account.

when attempting something like this you can't have a limit on how much you can afford because you'll inevitably need much more than you realize. but good luck to you
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #18 ·
Thats funny

Has anyone on this board actually done the swap.
I need to talk to them, I see that you will be no good to me.
Since all you seem to have is Critisism but no helpfull hints.
Since you did spend alot of time at madajvi figured you may know.
But it's all good have fun with your new car.
I need Enthusiasts like Chris Roden from tenneessee to make things happen.
 
1 - 20 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top