The Nissan Club banner

1 - 4 of 4 Posts

·
Dreamer
Joined
·
2,712 Posts
Discussion Starter #1
Ok I am about to install my adapter style intake. Theres only one sensor in front of the air box so I am guessing I only have to put that senor inside the intake tube? Where do I slip it in? Also should do I have to unplug the battery before installing the intake? I need this info asap! Thanks
 

·
Official Troll
Joined
·
7,780 Posts
That's the air temp sensor. Usually people will drill/cut a hole in the filter and plug the sensor in the hole.
 

·
Dreamer
Joined
·
2,712 Posts
Discussion Starter #3
i got the adapter type intake. Its just an intake and a little adapter plate. I cant drill a hole in that....
 

·
Senior Member
Joined
·
13,021 Posts
if you can't drill a hole in the filter stick the sensor inside of the filter between the adapter and the filter. make sure the sensor is totally in the filter though and not inbetween the filter and adapter. the wire from the sensor should be between the adapter and filter. Hope that made sense.
 
1 - 4 of 4 Posts
Top