camshaft position sensor, bank 1 and bank 2

countryracer · Mar 30, 2009

I had a computer analysis done on my 03 Altima 3.5 and it showed a camshaft position sensor (bank 2) being the reason why it takes so long for my car to start. Does anyone know if this is common, where the cps is located, and which c.p.s.

(bank 1/bank 2) is where?
I had thought that maybe it had something to do with the fuel line, fuel pressure, or maybe the fuel pump going bad that was causing the problem, but this is what showed up when analyzed

03ALT · Mar 31, 2009

?

no info on cps. My bank 2 cat went out and it was the one closest to the radiator, maybe bank 2 means the same head, but not sure

froedrick · Mar 31, 2009

Nissan Service Manuals Here you go. Download a service manual and look in the engine section. It'll let you know all you need to. Just to make it easier, though: in the 06 manual it's shown on page EM-132. The front of the engine is toward the right front fender. The left bank of the engine is therefore toward the radiator and is also known as "bank 2" This means the bank of the engine next to the windshield is the right bank of the engine, also known as "bank 1". Hope this helps.

camshaft position sensor, bank 1 and bank 2

Top Contributors this Month

Recommended Communities